Copper   Previous Next Wireline Testing 620 LAN Meter Range: 1 to 999 ft or .5 to 300m Resolution:1 ft or .5m Accuracy:5% ± 3 ft or 5% ± 1m Display:Feet or meters Power:Two AA size 1.5 volt alkaline batteries Battery Life: 50 hours of continuous operation, not including backlight consumption. Automatic Power Management Feature: Provides several months of operation with one set of batteries under normal use. Input Protection: The inputs withstand telephone ringing and loop voltages. The instrument warns the user with an "Active Cable" message and an audible warning tone. Size:18.4 x 9.8 x 4.6 cm (7.25 x 3.87 x 1.8 in) Weight:354 g (12.5 oz) Cable IQ Qualification Qualifies residential cabling systems to support CATV, 10/100/1000 Ethernet, voice and VoIP. Tests and troubleshoots all coax, data, and voice wiring. Graphically maps wiring configuration and shows distance to faults with built-in TDR. Locates and traces cables with IntelliTone™ digital signaling technology. Reduces installation costs by eliminating callbacks and disputes. Includes software for managing and printing professional test reports. Documents that cabling systems were installed properly and will perform reliably.   Dimensions:5.5" x 3.25" x 1" (139.7 x 82.5 x 25.4 mm) Battery:9-volt alkaline battery; low battery indication Display:Custom LCD, 1.75" x .85" Applications: Shielded (STP) and UTP cable; 75 or 50 Ohm Coaxial cable; 10 Base-T or 10/100 Base-T networks Main tester interface: Modular 9 connector for length, 10/100 link identification, wire map, office identifier, toner; Loopback interface:module 8 connector used for patch cable wiremap Length measurement: Measures length on all 4 pairs and displays in feet or meters;max length 1500 ft (457 m) Length calibration: User selectable NVP, NVP calculation based on known cable length (min.length 50 ft (15 m) and max. length 1500 ft (457 m) Wiremap and Office/Identifier Faults detected:Opens, Shorts, Reversed pairs, Swapped pairs, and Split pairs, distance maximum length: 656 ft (200/m) Cable Fault Locator Like other Fluke Network SuperVision Solutions™, the VisiFault provides superior vision into your network by enabling quick fiber verification and fault location. From products that stay ahead of your technology needs, to responsive service to keep you up and running, to training to help you grow your people and your business, Fluke Networks will help you keep pace in today’s fast moving, networked world by keeping its eye on the future for you. That’s Network SuperVision. That’s Fluke Networks’ promise to you. EXFO   EXFO is a recognized test and measurement expert in the global telecommunications industry and is the global market leader for portable optical test solutions and a leading supplier of protocol and copper access test solutions to enable triple-play services over converged, IP networks. EXFO’s PC/Windows-based modular FTB-200, FTB-400 and IQS-500 test platforms host a wide range of test solutions across optical, physical, data and network layers, while maximizing technology reuse across several market segments. Network Testing Optical: Platforms OTDR testing Power meters and Signal Detection Light Sources Optical Loss Test Sets Polarization and Chromatic Dispersion analysis ORL Testers, Attenuators and Talk sets Fiber Monitoring Solutions Fiber Inspection Probes   Copper Access: State of art Platforms xDSL Triple-Play QoS Testing xDSL Copper Loop Qualification Transport and Datacom: State of art Platforms Ethernet Testing SONET/SDH Testing IPTV Testing Fiber Channel Testing DSn/PDH Testing Network Monitoring – To be deleted. Lab/Manufacturing Testing Optical: State of art Platforms Power Meters Light Sources and Amplifiers? Variable Attenuators Spectral Testing Switch and Utility Modules ORL Testing Polarization Analysis Integrated Test Systems Refractive Index Profilers Transport and Datacom State of art Platforms Ethernet Testing SONET/SDH Testing Fiber Channel testing DSn/PDH Testing Previous Next